The bath seat is designed to provide comfort and safety during hygiene procedures — allowing the user to sit securely while taking a shower or bath. It is intended for elderly people who have difficulty sitting down or getting up from the bottom of the bathtub, for individuals with weakened health who are undergoing rehabilitation after serious injuries or surgeries, as well as for people with limited physical abilities.
Seat board — 1 pc.
Main frame — 1 pc.
Armrests — 4 pcs.
Buckles — 4 pcs.
Screws — 2 pcs.
Spacers — 2 pcs.
Non-slip rubber tips — 4 pcs.
User manual — 1 pc.
Clean daily with a mild soap solution. Do not use abrasive cleaners. Wipe the seat dry with a cloth after each use.
Store at room temperature, away from direct sunlight and moisture.
(list of standard symbols to be indicated depending on packaging design)
Assembly of the seat:
Place the rectangular frame on the back of the seat board and align the screw holes.
Tighten the screws with washers securely and ensure there is no looseness.
Before use, make sure the seat board is firmly fixed.
Do not position the seat asymmetrically relative to the edges of the bathtub, and the armrest edges must fully rest on the tub.
Attention: If the seat board significantly extends beyond the bathtub edges on one side, it may be dangerous for the user and lead to falls.
Check that the product is ready for use.
Always inspect the technical condition before each use.
Ensure all parts are securely attached and fixed.
Do not use the product if worn or damaged.
Always make sure the seat board is properly attached before use.
Users with limited mobility are advised to seek assistance from a helper.
Maximum user weight must not exceed 120 kg.
Strictly prohibited:
Using the product for purposes other than intended;
Using the product in a faulty condition;
Making modifications to the product’s construction.
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
